Remove/Install Head Restraint On Front Seat - AR91.16-P-0040S

Model 223 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove seat backrest trim.		AR91.10-P-1912SA
		Model 223 except code 735 (Additional scope of trim elements)
		Model 223 with code 735 (Additional scope of trim elements)	AR91.10-P-1912S
2	Remove rear airbag.	Model 223 with code 302 (Tubular structure airbag for rear occupants)
			AR91.60-P-0704S
3	Move seat backrest (1) toward rear until the head restraint can be removed.
4	Unclip electrical connectors (2).	The number of electrical connectors (2) may vary depending on the equipment variant.
5	Disconnect electrical connectors (2).	The number of electrical connectors (2) may vary depending on the equipment variant.
6	Release locking clips (3) and remove downwards.
7	Release head restraint guides (4) and remove head restraint (5) upwards.	Make sure that the head restraint guides (4) are locked.
8	Install in the reverse order.