Remove/Install Battery Sensor Of 12 V On-Board Electrical System - AR54.10-P-0062S

Model 223

except code ME10 (Hybrid vehicle (plug-in, PHEV))

MODIFICATION NOTES

07.07.2021

Commission battery sensor (B95), added.

Step 5

G16191571

Courtesy of MERCEDES-BENZ USA

Notice	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
Notice	Notes on battery		AH54.10-P-0001-01A
	Remove/install
1	Disconnect ground line (2) from on-board electrical system battery (G1).		AR54.10-P-0051S
2	Disconnect electrical connector (1).
3	Remove ground line (2) of battery sensor (B95) from body.	The ground line (2) and battery sensor (B95) are one component part and cannot be replaced individually.
		Powerpack ground point, tml.31 LHD vehicle	*BA00.19-P-1001-01N
		Powerpack ground point, tml.31 RHD vehicle	*BA00.19-P-1046-01N
4	Install in the reverse order.
5	Commission battery sensor (B95).	When replacing battery sensor (B95).
			AD00.00-P-2000-06FR

GROUND POINTS

Number	Designation			Model 223 except code Z07 (B7 armoring on special protection version)	Model 223 with code Z07 (B7 armoring on special protection version)
BA00.19-P-1001-01N	Powerpack ground point, tml.31 LHD vehicle	W106	Nm	7	7

GROUND POINTS

Number	Designation			Model 223 except code Z07 (B7 armoring on special protection version)	Model 223 with code Z07 (B7 armoring on special protection version)
BA00.19-P-1046-01N	Powerpack ground point, tml.31 RHD vehicle	W106	Nm	16	16