Remove/Install Front Floor Covering On Driver's Side - AR68.80-P-0007S

Model 223 

MODIFICATION NOTES

14.10.2020

Check for correct seat of condensation drain hoses at air conditioner housing and at body opening, added

Operation step 7

Courtesy of MERCEDES-BENZ USA

	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Remove floor mat (2).
2	Remove door sill (3).	Long wedge	Fig 1
3	Remove trim under driver's side instrument panel.		AR68.10-P-1501S
4	Remove accelerator pedal module (A68).		AR30.12-P-1321S
5	Release driver's seat (4) and tilt backward.	Do not disconnect electrical connectors.	AR91.10-P-1000S
6	Remove floor covering (1) from the front to the rear.	Position floor covering (1) below center console (5).
		Long wedge	Fig 1
7	Check for correct seat of condensation drain hoses at air conditioner housing and at body opening.		AR83.30-P-5200-03A
8	Install in the reverse order.

Fig 1: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA