Remove/Install Trunk Lid Lock Actuator - AR88.50-P-5090S

Model 223.0/1/9 

Fig 1: Trunk Lid Lock Actuator Components Location - Model 223.0/1/9

Courtesy of MERCEDES-BENZ USA

Shown on removed trunk lid lock actuation with trunk lid/tailgate external operation button (S88/8) with open lock (3) 

Courtesy of MERCEDES-BENZ USA

	Risk of injury  caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
	Risk of injury  caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A
	Notes on HANDS-FREE ACCESS		AH80.61-P-0001-01A
	Remove/install
1	Remove handle strip (1).		AR88.50-P-5064S
2	Remove trunk lid trim.		AR88.50-P-0006S
3	Disconnect electrical connectors (2).
4	Open lock (3).
5	Move trunk lid lock actuation with trunk lid/tailgate external operation button (S88/8) in direction of arrow and remove from outside.
6	Install in the reverse order.