Remove/Install Radiator Grille - AR88.40-P-4001S
Model 223.0/1/9
Shown on model 223.0 with code 233 (DISTRONIC PLUS) and code 501 (360° Camera)
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notice | Notes on preventing damage to electronic components due to a magnetic tool | AH54.00-P-0002-01A | |
| Remove/install | |||
| 1 | Unclip radiator grille (1) at top starting at front bumper. | ||
| 2 | Lift radiator grille (1) until electrical connectors (2, 3, 4) can be accessed. | ||
| 3 | Disconnect electrical connectors (2, 3, 4). | ||
| 4 | Remove radiator grille (1). | ||
| 5 | Install in the reverse order. | ||
| 6 | Calibrate all the cameras in the 360° camera system using the vehicle diagnosis system. | Model 223.0/1/9 with code 501 (360° camera) |
|
| AD00.00-P-2000-06FR | |||
| 7 | Perform calibration of midrange radar sensor. | Model 223.0/1/9 with code 239 (Adaptive cruise control Pro (DISTRONIC PRO)) Model 223.0/1/9 with code 258 (Collision warning system with active brake application FCW-Stop) When replacing medium-range radar sensor. |
|
| AD00.00-P-2000-06FR |