LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> S500 >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electrical System, Equipment & Instruments (2 Of 3) -- 223 Chassis >> Testing & Repair >> Remove/Install DC/DC Converter Control Unit Of Secondary 12 V On-Board Electrical System - AR54.21-P-1604S

Remove/Install DC/DC Converter Control Unit Of Secondary 12 V On-Board Electrical System - AR54.21-P-1604S

Model 214 

with code 503 (Remote-controlled parking) 

Model 223 

with code 200 (Conditionally automated driving) 

Model 223 

with code 503 (Remote-controlled parking) 

Shown on model 223 

G16191650Courtesy of MERCEDES-BENZ USA

Shown on model 214.0 with code ME10 (Hybrid vehicle (plug-in, PHEV)) 

G16191651Courtesy of MERCEDES-BENZ USA

Shown on model 214.0 with code ME10 (Hybrid vehicle (plug-in, PHEV)) 

G16191652Courtesy of MERCEDES-BENZ USA
Notice  Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
  Notes on safety-relevant components   AH00.00-Z-0019-01A
REMOVINGINSTALLING Remove/install     
1 Disconnect ground line of secondary 12 V onboard electrical system battery. Model 223
with code 200 (Conditionally automated driving) Model 223
with code 503 (Remote-controlled parking)
AR54.10-P-0052S 
    Model 214
with code 503 (Remote-controlled parking)
AR54.10-P-0052WEE
2 Remove bracing (5) on left side. Model 214
with code 503 (Remote-controlled parking)
 
3 Release and disconnect electrical connector (2).    
4 Remove electric lines (3) from DC/DC converter control unit (N83/13). TORQUE SPECIFICATION Model 223
with code 200 (Conditionally automated driving) Model 223
with code 503 (Remote-controlled parking) Nut, electric line to DC/DC converter control unit
*BA54.21-P-1003-01D 
    TORQUE SPECIFICATION Model 214
with code 503 (Remote-controlled parking)
Nut, electric line to DC/DC converter control unit
*BA54.21-P-1003-01G 
5.1 Release DC/DC converter control unit (N83/13) and remove from holder upwards in direction of arrow. Model 223
with code 200 (Conditionally automated driving)
Model 223
with code 503 (Remote-controlled parking)
 
5.2 Release DC/DC converter control unit (N83/13) at catch hook (4) and remove from holder to side in direction of arrow. Model 214
with code 503 (Remote-controlled parking)
 
6 Install in the reverse order.    
7 Commission DC/DC converter control unit (N83/13). If the DC/DC converter control unit (N83/13) was replaced.  
REFER TO SELF-DIAGNOSTIC SYSTEMS     AD00.00-P-2000-06FR
CONTROL UNITS

Number Designation Model 223
BA54.21-P-1003-01D Nut, electric line to DC/DC converter control unit Nm 16
CONTROL UNITS/BASE MODULE

Number Designation Model 214
BA54.21-P-1003-01G Nut, electric line to DC/DC converter control unit M8 Nm 16