Remove/Install Fan For Instrument Cluster Display - AR54.30-P-6017S
Model 223
with code 200 (Conditionally automated driving)
Model 223
with code 445 (Head-up display with augmented reality.)
Model 223
with code 451 (3D combination display)
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove trim at bottom for instrument panel on driver's side. | AR68.10-P-1501S | |
| 2 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
| 3 | Remove ionizer. | Model 223 with code 200 (Conditionally automated driving) with code P21 (Air quality package) Model 223 with code 445 (Head-up display with augmented reality.) with code P21 (Air quality package) Model 223 with code 451 (3D combination display) with code P21 (Air quality package) |
AR83.40-P-0150S |
| 4 | Remove bolts (1). | ||
| 5 | Remove display fan motor (M4/25) from air duct (2). | ||
| 6 | Remove electrical wiring harness (3) from bracket (4). | ||
| 7 | Release and disconnect electrical connector (5). | ||
| 8 | Remove display fan motor (M4/25). | ||
| 9 | Install in the reverse order. |