Remove/Install Ionizer - AR83.40-P-0150S
Model 223
with code P21 (Air quality package)
Shown with removed instrument panel
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove trim at bottom for instrument panel on driver's side. | AR68.10-P-1501S | |
| 2 | Release electrical connector (1) and disconnect. | ||
| 3 | Slide ionizer (N18/9) upwards, release and unclip from air duct (2). | ||
| 4 | Remove ionizer (N18/9). | ||
| 5 | Install in the reverse order. |