Remove/Install Augmented Reality Camera - AR54.30-P-0004S
Model 223
with code U19 (Augmented reality video)
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
| 2 | Remove cover (1). | Fig 1 | |
| 3 | Disconnect electrical connection (2). | ||
| 4 | Unhook spring clip (3) using suitable tool and remove camera for augmented reality (B84/14). | Do not touch lens of camera for augmented reality (B84/14). Otherwise, soiling could result in the camera for augmented reality (B84/14) malfunctioning. |
|
| 5 | Install in the reverse order. | ||
| 6 | Calibrate camera for augmented reality (B84/14) using diagnostic system. | ||
| AD00.00-P-2000-06FR | |||
| 000 588 11 21 00 Adjustment device | WS82.00-P-0151B | ||
| 000 588 00 23 00 Adjusting gauge | WS82.00-P-0028B |