Head Unit/Instrument Cluster Displays, Basic Function - GF54.30-S-2005A
Model All (Light transporter)
Overview
This document contains information on:
- General
- Function requirements
- Function
General
The head unit/instrument cluster displays the contents of the multimedia system and the instrument cluster in two separate displays:
- Display for the instrument cluster
- Display for the multimedia system (central display)
The size of the individual displays depends on the model and equipment installed. Depending on the model, the displays are integrated into a display cluster.
The display for the multimedia system detects swipe movements with one or more fingers and tapping motions on the display. The inputs detected are transmitted as operation signals to the head unit.
The head unit/instrument cluster displays are located in the instrument panel.
Function requirements
- Terminal 30 t ON
Function
Multifunction display
The multifunction display is located in the instrument cluster.
Depending on the vehicle equipment, the following information and more is shown on the multifunction display:
- "READY" indicator (vehicle ready to drive)
- Status display of transmission position (drive range) and recuperation level
- Display of drive programs
- State of charge of high-voltage battery
- Display messages, menus and menu line
- Display of outside temperature, time, and travel distance
- Charge screen
Central display
Depending on the equipment installed, the central display detects touch movements on the touchpad or the head unit control panel control unit. The detected inputs are transmitted as operation signals to the central display.
Various vehicle functions are displayed and controlled via the central display (e.g. navigation).
| Function schematics | |||
| Function schematic for displaying operating statuses in instrument cluster display | Model 420 | PE54.30-S-2503-97VRA | |
| Model 447.6/7 with code E7M (MBUX multimedia system) with code XM7 (MOPF II) | PE54.30-S-2503-97A | ||
| Function schematic for displaying trip information in instrument cluster display | Model 420 | PE54.30-S-2504-97VRA | |
| Model 447.6/7 with code E7M (MBUX multimedia system) with code XM7 (MOPF II) | PE54.30-S-2504-97A | ||
| Detailed information | |||
| Instrument cluster control unit, detailed information | Model 420 | GF54.30-S-0014A | |
| Central display, detailed information | Model 420 | GF54.30-S-0029A | |
| Component descriptions | |||
| Instrument cluster (IC) control unit component description | Model 447.6/7 with code XM7 (MOPF II) |
GF54.21-S-6004A | |
| Instrument cluster (IC) control unit, component description | Model 420 | GF54.30-S-6004VRA | |
| Central display, component description | Model 420 | GF54.30-S-6130VRA | |
| Model 447.6/7 with code E7M (MBUX multimedia system) with code XM7 (MOPF II) |
GF54.30-S-6130A |