Sound System Amplifier Control Unit, Basic Function - GF82.62-S-9890A
Model All (Light transporter)
Overview
This document contains the following information:
- General
- Function requirements
- Function
General
The sound system amplifier control unit is located in the trunk/load compartment under the floor or behind the side trim.
Function requirements
- Circuit 30t ON
- Electrical wake-up signal
- Audio muting from telematics services control unit not active
Function
The sound system amplifier control unit has the following functions:
- Optimizing input signals using digital signal processing and sound optimization algorithms
- Implementing audio parameters from the multimedia system
- Amplifying the input signals
- Distributing audio signals to the speakers
- Adjusting volume to noise level
- Generation of engine sound (equipment specific)
- Engine sound reduction in vehicle interior (equipment specific)
| Component descriptions | |||
| Component description for sound system amplifier control unit | Model 447 with code E65 (Burmester® surround sound system) with code XM7 (MOPF II) |
GF82.62-S-5010A |