Check Brake Forces Of Service Brake - AR42.10-S-5000E
Model 447
MODIFICATION NOTES
| 22.11.2023 | AH document reference added | Note module |
| Risk of death caused by limbs being caught or crushed by rotating parts when performing tests on the brake test stand | Never leave the vehicle unattended on the rollers except in an emergency. Ensure that no one is under the vehicle or near rotating parts during testing. In case of emergency, use the EMERGENCY OFF switch to shut down test stand. | AS42.00-Z-0001-01A | |
| Notice | General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment | Model 447 with engine 780 | AH00.00-Z-0300-01A |
| Notes on the evaluating and interpreting brake tests on test stands | AH42.00-D-0004-01KOS | ||
| Check | |||
| 1 | Mount pedal force meter onto brake pedal. | ||
| 000 588 32 21 00 Roller brake test stand | WS42.00-P-0116B | ||
| 2 | Drive vehicle into roller brake test stand. | ||
| 000 588 32 21 00 Roller brake test stand | Do not switch off engine. Vehicle must be operational. |
WS42.00-P-0116B | |
| 3 | Gradually apply specified test forces to the brake pedal, and compare the brake force reached on each axle against the reference values. | ||
If the reference values are not achieved, ↓ Determine causes and repair brake system as required. |
*BE42.10-Z-1001-17KOK | ||
| 4 | Drive the vehicle off the roller brake test stand. | If the vehicle with a drive axle is on the rollers, drive it off the rollers only when the roller drive is running. Otherwise, excessive roller acceleration could damage the drive of the rollers. |
|
| 5 | Operate parking brake. | ||
| 6 | Switch off ignition. | ||
| 7 | Remove pedal force meter. | ||
| 000 588 32 21 00 Roller brake test stand | WS42.00-P-0116B |
REFERENCE VALUES FOR BRAKE FORCE
| Number | Designation | Model 447 with classification N1 in accordance with EU Directive 2007/46/EC, permissible gross mass 3050 kg | Model 447 with classification M1 in accordance with EU Directive 2007/46/EC, permissible gross mass 3050 kg | |||
|---|---|---|---|---|---|---|
| BE42.10-Z-1001-17KOK | Pedal force values (manufacturer's specifications for reference value method) | 16" brake system | Proportion of brake force to front axle (min.) | % | 58, 1 | 58, 1 |
| Proportion of brake force to rear axle (min.) | % | 17, 3 | 17, 3 | |||
| Proof load (min.) | N | 65 | 65 | |||
| Proof load (max.) | N | 405 | 405 | |||
| Pedal force for 50 % braking deceleration (max.) | N | 255 | - | |||
| Pedal force for 58 % braking deceleration (max.) | N | - | 290 | |||
| 17" brake system | Proportion of brake force to front axle (min.) | % | 59, 4 | 59, 4 | ||
| Proportion of brake force to rear axle (min.) | % | 16, 6 | 16, 6 | |||
| Proof load (min.) | N | 65 | 65 | |||
| Proof load (max.) | N | 405 | 405 | |||
| Pedal force for 50 % braking deceleration (max.) | N | 245 | - | |||
| Pedal force for 58 % braking deceleration (max.) | N | - | 280 | |||
REFERENCE VALUES FOR BRAKE FORCE
| Number | Designation | Model 447 with engine 254, 274, 622, 651, 654 with classification N1 in accordance with EU Directive 2007/46/EC, permissible gross mass 3200 kg | Model 447.6 with engine 780 with classification N1 in accordance with EU Directive 2009/40/EC, permissible gross mass 3200 kg | |||
|---|---|---|---|---|---|---|
| BE42.10-Z-1001-17KOK | Pedal force values (manufacturer's specifications for reference value method) | 16" brake system | Proportion of brake force to front axle (min.) | % | - | 58, 1 |
| Proportion of brake force to rear axle (min.) | % | - | 17, 3 | |||
| Proof load (min.) | N | - | 65 | |||
| Proof load (max.) | N | - | 335 | |||
| Pedal force for 50 % braking deceleration (max.) | N | - | 265 | |||
| Pedal force for 58 % braking deceleration (max.) | N | - | - | |||
| 17" brake system | Proportion of brake force to front axle (min.) | % | 59, 4 | - | ||
| Proportion of brake force to rear axle (min.) | % | 16, 6 | - | |||
| Proof load (min.) | N | 65 | - | |||
| Proof load (max.) | N | 405 | - | |||
| Pedal force for 50 % braking deceleration (max.) | N | 255 | - | |||
| Pedal force for 58 % braking deceleration (max.) | N | - | - | |||
REFERENCE VALUES FOR BRAKE FORCE
| Number | Designation | Model 447 with classification M1 in accordance with EU Directive 2007/46/EC, permissible gross mass 3200 kg | Model 447.7/8 with engine 780 with classification M1 in accordance with EU Directive 2009/40/EC, permissible gross mass 3500 kg | |||
|---|---|---|---|---|---|---|
| BE42.10-Z-1001-17KOK | Pedal force values (manufacturer's specifications for reference value method) | 16" brake system | Proportion of brake force to front axle (min.) | % | - | - |
| Proportion of brake force to rear axle (min.) | % | - | - | |||
| Proof load (min.) | N | - | - | |||
| Proof load (max.) | N | - | - | |||
| Pedal force for 50 % braking deceleration (max.) | N | - | - | |||
| Pedal force for 58 % braking deceleration (max.) | N | - | - | |||
| 17" brake system | Proportion of brake force to front axle (min.) | % | 59, 4 | 59, 4 | ||
| Proportion of brake force to rear axle (min.) | % | 16, 6 | 16, 6 | |||
| Proof load (min.) | N | 65 | 65 | |||
| Proof load (max.) | N | 405 | 335 | |||
| Pedal force for 50 % braking deceleration (max.) | N | - | - | |||
| Pedal force for 58 % braking deceleration (max.) | N | 285 | 310 | |||