Remove/Install Door Panel Of Sliding Door - AR72.16-S-6610E

Model 447, 448 

Shown On removed sliding door With Code E65 (Burmester surround sound system) and With Code LC1 (Ambiance illumination) 

Courtesy of MERCEDES-BENZ USA

	Risk of injury  caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
Notice	Notes on carrying out repair work in the vehicle interior		AH68.00-D-0001-01KOS
	Remove/install
1	Remove lower and upper sliding door paneling	Model 447.6 Model 447.7 except code V23 (Interior trim, premium version)	AR68.30-S-1180E
2	Remove top sliding door frame paneling (1)	Model 447.7, 448.7 with code V23 (Interior trim, premium version) Model 447.8, 448.8	AR72.16-S-6613E
3	Remove cover (2) and unscrew bolt below	Model 447.7, 448.7 with code V23 (Interior trim, premium version) Model 447.8, 448.8 Bolt, door guide at bottom to sliding door	*BA72.16-Z-1003-01KOJ
4.1	Unclip door trim (3) and remove	Model 447.7, 448.7 with code V23 (Interior trim, premium version) Model 447.8, 448.8 except code E65 (Burmester® surround sound system) except code LC1 (ambient lighting) Always replace all retaining clips (5). Otherwise the door paneling (3) cannot be seated permanently on the sliding door. Long wedge	Fig 1
4.2	Unclip door trim (3) and remove until electrical connectors on door paneling (3) are accessible	Model 447.8, 448.8 with code E65 (Burmester® surround sound system) Model 447.8, 448.8 with code LC1 (ambient lighting) Always replace all retaining clips (5). Otherwise the door paneling (3) cannot be seated permanently on the sliding door. The number of electrical connectors varies depending on equipment installed. Long wedge	Fig 1
5	Disconnect electrical connectors from door trim (3) and remove door paneling (3)	Model 447.8, 448.8 with code E65 (Burmester® surround sound system) Model 447.8, 448.8 with code LC1 (ambient lighting)
6	Install in the reverse order
	Check
7	Check all electrical components in repair area for proper function

Fig 1: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA