LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> Metris Van Cargo >> Repair and Diagnosis >> Body & Frame >> Windows >> Doors (1 Of 3) -- 447 Chassis >> Testing & Repair >> Remove/Install Door Foil For Rear Door And Tailgate - AR72.20-S-4100E

Remove/Install Door Foil For Rear Door And Tailgate - AR72.20-S-4100E

Model 447, 448 

Shown On Model 447.6 With Code W54 (Two-wing rear-end door, 270 degrees) 

G16488394Courtesy of MERCEDES-BENZ USA

Shown On Model 447.8 With Code W68 (Electrically actuated liftgate) 

G16488395Courtesy of MERCEDES-BENZ USA
DANGER Risk of injury  caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. No parts of the body or limbs should be within the operating area when the components are moving. AS00.00-Z-0011-01A
REMOVINGINSTALLING Remove/install     
1.1 Remove liftgate paneling Model 447, 448 with code W65 (Tailgate)
Model 447, 448 with code W68 (Electrically operated liftgate)
AR72.20-S-6445E 
1.2 Remove paneling on rear-end door Model 447.6/7 with code W50 (Rear-end door, double-wing, 180 degrees without window)
Model 447.6/7 with code W54 (2-wing rear-end door, 270 degrees)
AR72.20-S-6615E 
2 Remove foil (1) INSTALLATION IMPORTANT Replace damaged foil (1).  
3 Install in the reverse order