LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> Metris Van Cargo >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Interior Equipment -- 447 Chassis >> Testing & Repair >> Remove/Install Trim Panel At D-Pillar - AR68.30-S-4495E

Remove/Install Trim Panel At D-Pillar - AR68.30-S-4495E

Model 447.7/8, 448 

MODIFICATION NOTES

15.12.2016 Method extended Operation steps 1, 6, 7, 8, 9  
G16507217Courtesy of MERCEDES-BENZ USA

Shown On 447.7 With Code SH8 (Window airbags driver, passenger and rear) 

Left and right side of vehicle on model 447.8 except model ZK7 (MARCO POLO equipment line) and right side of vehicle on model 448.8 except model W68 (Electrically actuated liftgate), shown With Code SH8 (Window airbag for driver, passenger and rear) 

G16507218Courtesy of MERCEDES-BENZ USA
G16507219Courtesy of MERCEDES-BENZ USA

Model 447.8 With Code ZK7 (MARCO POLO equipment line) 

Notice  Notes on carrying out repair work in the vehicle interior   AH68.00-D-0001-01KOS 
REMOVINGINSTALLING Remove/install     
1 Open liftgate or rear-end door    
2 Unclip cover (1) Model 447.7/8, 448.8
with code SH8 (Window airbags for driver, front passenger and rear)		  
3 Remove screw/bolt (2) Model 447.7/8, 448.8
with code SH8 (Window airbags for driver, front passenger and rear)		  
4 Remove rear curtain from paneling (3) Model 447.7
with code ZH6 (Marco Polo ACTIVITY)		  
5.1 Unclip paneling (3) in lower area (arrows A) with long wedge and pull out of guide downward at top (arrows B) Model 447.7, 448.7
Model 447.8
except code W68 (EASY-PACK-tailgate)
except code ZK7 (Equipment line MARCO POLO).
INSTALLATION IMPORTANT : Ensure that window and door frame seal are seated correctly.
SPECIAL TOOL Long wedge		 Fig 1
5.2 Unclip paneling (3) in lower area (arrows A) with long wedge and pull out of guide downward at top (arrows B) Model 447.8
with code W68 (EASY-PACK-tailgate)
except code ZK7 (Equipment line MARCO POLO)
Model 448.8
When removing paneling (3) on left side of vehicle.
INSTALLATION IMPORTANT Ensure that window and door frame seal are seated correctly.
SPECIAL TOOL Long wedge		 Fig 1
6 Remove roller sun blind in rear Model 447.8
with code ZK7 (Equipment line MARCO POLO)		 AR68.50-S-0002E
7 Open closet (12) Model 447.8
with code ZK7 (Equipment line MARCO POLO)		  
8 Remove clip (13) Model 447.8
with code ZK7 (Equipment line MARCO POLO)		  
9 Starting on left side, remove roller blind (15) from sealing frame (14) (arrow), and take out Model 447.8
with code ZK7 (Equipment line MARCO POLO)		  
10 Unclip inner paneling (5) in side area (arrows C) with long wedge and pull out downward out of guides at top (arrows D) Model 447.8
with code W68 (EASY-PACK-tailgate)
Model 447.8
with code ZK7 (Equipment line MARCO POLO)
Model 448.8
INSTALLATION IMPORTANT : Ensure that window guide seal is seated correctly.
SPECIAL TOOL Long wedge		 Fig 1
11 Open locks (6) and remove actuator rod (7) from drive for electrical liftgate Model 447.8
with code W68 (EASY-PACK-tailgate)
Model 448.8		  
12 Remove retaining clip (8) Model 447.8
with code W68 (EASY-PACK-tailgate)
Model 447.8
with code ZK7 (Equipment line MARCO POLO)
Model 448.8		  
13 remove screw/bolt (9) Model 447.8
with code W68 (EASY-PACK-tailgate)
Model 447.8
with code ZK7 (Equipment line MARCO POLO)
Model 448.8		  
14 Remove outer paneling (10) Model 447.8
with code W68 (EASY-PACK-tailgate)
Model 447.8
with code ZK7 (Equipment line MARCO POLO)
Model 448.8
INSTALLATION IMPORTANT : Ensure that window frame seal is seated correctly.		  
15 Prepare paneling (3) for installation When replacing paneling (3).
Model 447.7
with code ZH6 (Marco Polo ACTIVITY)		 AR68.30-S-0111-01E 
16 Install in the reverse order    
INSPECT Check     
17 Check electric liftgate for proper function Model 447.8
with code W68 (EASY-PACK-tailgate)
Model 448.8		  
Fig 1: Identifying Long Wedge (115 589 03 59 00)
G07070400Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals