Remove/Install Bottom Door Guide For Sliding Door - AR72.16-S-7843E
Model 447, 448
Shown On model 447.8
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Remove/install | |||
| 1 | Remove lower sliding carriage (1) for sliding door | AR72.16-S-7844E | |
| 2 | Remove lower guide rail for sliding door | AR72.16-S-7816E | |
| 3 | Remove cover (2) | Model 447.7, 448.7 with code V23 (Interior trim, premium version) Model 447.8, 448.8 |
|
| 4 | Detach door trim in area of bolts (3) until bolts (3) are accessible | Model 447.7, 448.7 with code V23 (Interior trim, premium version) Model 447.8, 448.8 |
|
| 5 | Remove bolts (3) | *BA72.16-Z-1003-01KOJ | |
| 6 | Remove lower door guide (4) | ||
| 7 | Install in the reverse order |
SLIDING DOORS
| Number | Designation | Model 447, 448 | |
|---|---|---|---|
| BA72.16-Z-1003-01KOJ | Bolt, door guide at bottom to sliding door | Nm | 23 |