Parameterizing Control Unit Of Parameterizable Special Module (PSM) - AR54.21-S-2001E
Model 447, 448
| Notes on programming control units | AH54.21-P-0001-03Z | ||
| Parameterization | |||
| 1 | Connect diagnostic system and start "Xentry Diagnostics" (XD) | ||
| AD00.00-S-2000-04E | |||
| 2 | Call up PSM control unit in diagnostic system | ||
| 3 | Select the item "Parameterize" in the menu "parameterizable special module PSM functions" | ||
| 4 | Select the desired parameter set in the parameter main menu | ||
| 5 | Disconnect diagnostic system | ||
| AD00.00-S-2000-04E |