Perform Wheel Alignment Check - AR40.20-P-0200ME
Model 167
| Check | |||
| 1 | Check condition of vehicle. | The specified tolerances of vehicle specified values are only for the test. If the vehicle is adjusted, the specified values should be aimed for. |
|
| 2 | Check condition and tire tread depth of tires. | ||
| AP40.10-P-4052B | |||
| 3 | Check rims for damage. | ||
| 4 | Check and correct tire pressure. | ||
| AP40.15-P-4061A | |||
| 5 | Check vehicle underside for damage and corrosion of suspension, chassis and load-bearing body parts. | ||
| AP60.00-P-0051L | |||
| 6 | Check condition of the steering mechanism. | ||
| AP46.00-P-4651E | |||
| 7 | Check front axle joints for play and check dust boots for damage. | ||
| AP33.10-P-3358E | |||
| 8 | Check rear axle joints for play and check dust boots for damage. | ||
| AP35.20-P-3552E | |||
| 9 | Check condition of shock absorbers and springs. | ||
| Model 167 except code 489 (AIRMATIC Dual Control/semi-active air suspension) except code 490 (Electrohydraulic suspension) | AP32.25-P-3255G | ||
| Model 167 with code 489 (AIRMATIC Dual Control/semi-active air suspension) except code 490 (Electrohydraulic suspension) Model 167 with code 489 (AIRMATIC Dual Control/semi-active air suspension) with code 490 (Electrohydraulic suspension) |
AP32.25-P-3255I | ||
| Preparatory tasks | |||
| 10 | Print out form for wheel alignment measurement. | If a visual wheel alignment measurement is performed. | |
| Wheel Alignment Form | OF40.20-P-3000-01B | ||
| 11 | Drive the vehicle onto measuring station and secure using parking brake. | ||
| 12 | Unlock turn and slip plates. | ||
| 13.1 | Rock vehicle to settle suspension on front and rear axles several times. | Model 167 except code 489 (AIRMATIC Dual Control/semi-active air suspension) except code 490 (Electrohydraulic suspension) | |
| 13.2 | Raise vehicle level and lower again. | Model 167 with code 489 (AIRMATIC Dual Control/semi-active air suspension) except code 490 (Electrohydraulic suspension) Model 167 with code 489 (AIRMATIC Dual Control/semi-active air suspension) with code 490 (Electrohydraulic suspension) |
|
| 14 | Switch off easy entry and exit feature. | Model 167 with code 275 (Memory Package (driver's seat, steering column and mirror)) | |
| 15 | Lower window of driver's door. | ||
| 16 | Install the brake pedal jack with the adapter for brake pedal jack between the brake pedal and the driver's seat. | Otherwise, the brake pedal and driver's seat may be damaged. |
|
| Fig 2 | |||
| Fig 3 | |||
| 17 | Determine vehicle level on front and rear axle using electronic inclinometer. | AR40.20-P-0301ME | |
| 18 | Attach quick clamping devices at front and rear wheels and remove tensioning levers. | AR40.20-P-0230SX | |
| 19 | Attach wheel mirrors or measurement pickups | ||
| 20 | Attach measuring heads. | ||
| Measure | |||
| 21 | Carry out input measurement. | ||
| 22 | Compare determined values with the specified values. | Assign suspension data | AR40.20-P-0203ME |
| Adjust | |||
| 23 | Adjust camber on rear axle. | According to results of initial measurement. | |
| AR40.20-P-0202ME | |||
| 24 | Adjust toe on rear axle. | According to results of initial measurement. | |
| AR40.20-P-0261ME | |||
| 25 | Adjust camber and caster on front axle. | According to results of initial measurement. | |
| AR40.20-P-0263ME | |||
| 26 | Adjust toe on front axle. | According to results of initial measurement. | |
| AR40.20-P-0264ME | |||
| Measure | |||
| 27 | Carry out output measurement. | ||
| Concluding tasks | |||
| 28 | Detach measuring heads. | ||
| 29 | Remove wheel mirrors or measurement pickups. | ||
| 30 | Attach tensioning levers and remove quick clamping devices. | ||
| 31 | Remove brake pedal jack with adapter for brake pedal jack. | ||
| 32 | Lock turn and slip plates. | ||
| 33 | Drive vehicle off measuring system. | ||
| 34 | Switch on easy entry and exit feature. | Model 167 with code 275 (Memory Package (driver's seat, steering column and mirror)) | |
| 35 | Check headlamp adjustment. | ||
| AP82.10-P-8260Q |