LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> GT 53 AMG >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seats, Bunks, Restraint Systems (2 Of 3) -- 290 Chassis >> Testing & Repair >> Remove/Install Right Rear Seat Backrest Cover - AR91.18-P-1876FRY

Remove/Install Right Rear Seat Backrest Cover - AR91.18-P-1876FRY

Model 290 

with code 287 (Through-loading feature) 

Shown except code 224 (Design individual rear seat system) 

G16556464Courtesy of MERCEDES-BENZ USA

Shown with code 224 (Design individual rear seat system) 

G16556465Courtesy of MERCEDES-BENZ USA
REMOVING Remove     
1 Remove pivot bearing of right seat backrest with right rear seat backrest inclination switch.   AR91.29-P-1773FR 
    IMPORTANT The right rear seat backrest inclination switch can remain on the pivot bearing  
2 Remove head restraint guides.   AR91.16-P-1776FR 
3 Remove cover below head restraint. Model 290
with code 224 (Rear individual seat design)
with code 287 (Through-loading feature)
 
    SPECIAL TOOL Long wedge Fig 1
4 Unhook cover (1) all way around from seat backrest frame. SPECIAL TOOL Dismantling tool Fig 2
5 Guide electrical wiring harness of seat heating through cover (1). Model 290
with code 287 (Through-loading feature)
with code 872 (Left and right rear seat heating)
 
6 Remove seat backrest frame.    
7 Pull cover (1) over seat backrest padding (2).    
8 Release staple wires (3) at attachment points (arrows).   AR91.18-P-1871-01FRX 
    SPECIAL TOOL Padding clip pliers Fig 4
    SPECIAL TOOL Dismantling tool Fig 3
9 Remove cover (1) from seat backrest padding (2).    
INSTALLING Install     
10 Align cover (1) over seat backrest padding (2) so that the seams are seated in the cutouts of the seat backrest padding (2).    
11 Fasten staple wires (3) at attachment points (arrows).   AR91.18-P-1871-01FRX 
    SPECIAL TOOL Padding clip pliers Fig 4
    SPECIAL TOOL Dismantling tool Fig 3
12 Pull cover (1) over seat backrest padding (2).    
13 Place seat backrest frame onto seat backrest padding (2) and align.    
14 Hook-in cover (1) all way round on seat backrest frame. SPECIAL TOOL Dismantling tool Fig 2
15 Guide electrical wiring harness of seat heating through cover (1). Model 290
with code 287 (Through-loading feature)
with code 872 (Left and right rear seat heating)
 
16 Install cover below head restraint. Model 290
with code 224 (Rear individual seat design)
with code 287 (Through-loading feature)
 
17 Install head restraint guides.   AR91.16-P-1776FR 
18 Install pivot bearing of right seat backrest with right rear seat backrest inclination switch.   AR91.29-P-1773FR 
Fig 1: Identifying Long Wedge (115 589 03 59 00)
G16163165Courtesy of MERCEDES-BENZ USA
Fig 2: Identifying Dismantling Tool (205 589 02 63 00)
G16165181Courtesy of MERCEDES-BENZ USA
Fig 3: Identifying Dismantling Tool (205 589 03 63 00)
G16192754Courtesy of MERCEDES-BENZ USA
Fig 4: Identifying Padding Clip Pliers (454 589 03 37 00)
G16556469Courtesy of MERCEDES-BENZ USA