Remove/Install Radar Sensor In Rear Bumper - AR54.21-P-0704FRX
Model 290
with code 233 (DISTRONIC PLUS)
Model 290
with code 234 (Blind Spot Monitoring)
Shown with code 233 (DISTRONIC PLUS)
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Topical note | Notes on preventing damage to electronic components due to a magnetic tool | AH54.00-P-0002-01A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Carry out commissioning of rear bumper radar sensor (B92/6, B92/7, B92/10, B92/11). | When replacing rear bumper radar sensor (B92/6, B92/7, B92/10, B92/11). | |
| AD00.00-P-2000-06FR | |||
| 2 | Remove rear bumper. | AR88.20-P-2200FRX | |
| 3 | Remove cover (1). | ||
| 4 | Release rear bumper radar sensor (B92/6, B92/7, B92/10, B92/11) from rear bumper. | ||
| 5 | Disconnect electrical connector (2) and remove rear bumper radar sensor (B92/6, B92/7, B92/10, B92/11). | ||
| 6 | Install in the reverse order |