Remove/Install Logo Projector - AR82.10-P-0003FR
Model 290 with code 588 (Logo projection via longitudinal member)
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove left and right longitudinal member panel. | AR88.80-P-6000FR | |
| 2 | Remove bolt (2). | ||
| 3 | Release electrical connector (1) and disconnect. | ||
| 4 | Unclip left AMG light activation sequence projector (E47/1) or right AMG light activation sequence projector (E47/2) from catch tabs and remove. | ||
| 5 | Install in the reverse order. |