Remove/Install Right Rear Seat Belt Buckle - AR91.40-P-1528FR

Model 257, 290 

Shown on model 257 

Courtesy of MERCEDES-BENZ USA

	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Remove seat cushion in rear passenger compartment.	Model 257 Model 290 with code 568 (3-seater rear bench seat)	AR91.12-P-1021FR
		Model 290 except code 568 (3-seater rear bench seat)	AR91.12-P-1021FRX
2	Disconnect electrical connectors (1, 2).
3	Remove screw (3).	Bolt, rear seat belt buckle	*BA91.40-P-1009-01U
4	Remove right seat belt buckle (4) together with center seat belt buckle (5).	The right belt buckle (4) and the center belt buckle (5) form a unit and must be removed or replaced together.
		Note correct installation position of right belt buckle (4) and center belt buckle (5).
5	Install in the reverse order.

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 257	Model 290
BA91.40-P-1009-01U	Bolt, rear seat belt buckle	Nm	35	35