Remove, Replace And Install Rear Center Seat Belt - AR91.40-P-0683FRA
Model 257
with code 287 (Through-loading feature)
Model 290
with code 287 (Through-loading feature)
except code 224 (Individual rear seats)
Shown on model 257
| Risk of injury. Injury may result when the tension in the spring in the automatic belt retractor is released. | Never disassemble automatic belt retractors. | AS91.00-Z-0002-01A | |
| Remove/install | |||
| 1 | Remove rear left seat backrest cover. | Model 257 with code 287 (Through-loading feature) |
AR91.18-P-1875FR |
| Model 290 with code 287 (Through-loading feature) except code 224 (Individual rear seats) |
AR91.18-P-1875FRX | ||
| 2 | Remove cover from rear seat backrest. | ||
| 3 | Remove screw (1) of seat belt retractor (4). | *BA91.40-P-1007-01U | |
| 4 | Remove seat belt retractor (4) and guide seat belt (2) through seat belt duct (3). | ||
| 5 | Install in the reverse order. |
SEAT BELTS/EMERGENCY TENSIONING RETRACTORS
| Number | Designation | Model 257 | Model 290 | |
|---|---|---|---|---|
| BA91.40-P-1007-01U | Bolt, center seat belt retractor to rear seat backrest | Nm | 35 | 35 |