Remove/Install Rear Soundproofing For Engine - AR94.30-P-5410MRD

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2023 Mercedes-Benz E63 S AMG, 2023 Mercedes-Benz E53 AMG, 2023 Mercedes-Benz E350, 2022 Mercedes-Benz E53 AMG, and 2022 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.

Engine 274.9 in model 213

except code 920 (Direct petrol injection with stratified charging)

Engine 274.9 in model 238

except code 920 (Direct petrol injection with stratified charging)

Fig 1: Rear Engine Soundproofing Component Location - Model 213 With Engine 274.9 Except Code 920

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Unfasten rear engine mount from rear engine crossmember, lift transmission and support	Engine 274.9 in model 238 except code 920 (Direct petrol injection with stratified charging)	AR22.10-P-1160MRD
1		Engine 274.9 in model 213 except code 920 (Direct petrol injection with stratified charging) Use a hardwood block 50x50 mm to support rear engine mount.	AR22.10-P-1160OLC
2	Remove upper engine cover
3	Remove screw/bolt (2)	M6 x 1	*BA00.10-P-1002-04A
4	Unclip soundproofing (1) from bracket (3) and remove
5	Install in the reverse order

METRIC SCREWS/BOLTS AND NUTS AS PER MBN 10 105, 10 143

Number	Designation		8.8	10.9
BA00.10-P-1002-04A	M6 x 1	Nm	9	13