Use Of Wiring Diagrams - OV00.01-P-1901-03ZGA
MODEL 463
Model 463
as of model year 2013 up to model year 2019
/YoM 12 model refinement package to YoM 18 model refinement package
Wiring diagrams
- The wiring diagrams are filed in the respective function group according to the PE number, e.g.:PE07.16-P-2101ZGA or PE07.16-P-2101ZGB
To check the completeness of the volume the sequence of the wiring diagrams filed can be seen from the lists of contents of the respective function group. For supplements the wiring diagrams should be filed as per the supplement sheet.
Refer to example: OVERVIEW OF WIRING DIAGRAMS FOR MIXTURE FORMATION - PE07.00-P-1100ZGA
- The wiring diagrams are generated as function schematics, control unit diagrams or detailed function schematics and are structured as follows:
- Function schematics
The control units and electrical components required for the function are shown as symbols. The functional connections are realized by direct lines or by the data bus.
- Control unit diagrams
Control units that only fulfill one function, e.g. Parktronic, are shown complete with all connected components.
If control units fulfill several functions, e.g. ME-SFI [ME] control unit or SAM control unit, the control unit diagram includes a reference to a detailed function diagram. The abbreviations of the components are given in addition to this reference.
The relay wiring is also shown on the detailed function diagrams.
- Detailed function diagrams
If components form an independent function as per the overview of the function groups (e.g. windshield wipers), the components are shown on a detailed function diagram.
The wiring diagrams also contain linkages of possible versions and functions. Linkages, recognizable as versions, are framed and provided with an abbreviated designation/abbreviation. Versions are designated with 1 and 2 in the case of a phased-in modification.
- Variants denoted by the abbreviation "U..." or "Code...", are listed in the legends.
The used signal and terminal designations are explained under "Abbreviations of signal and circuit designations for wiring diagrams." Refer to OV00.01-P-1001-28ZGA *(A5).
- Wire cross-sections may differ from the illustration in the wiring diagrams.
Wiring diagram number
Function schematic
Wire Identification
Fuse blocks
Components and switches
Wire colors:
BK = Black
BN = Brown
BU = Blue
GN = Green
GY = Gray
OG = Orange
PK = Pink
RD = Red
TR = Transparent
VT = Violet
WH = White
YE = Yellow
The symbol
.. refers to further wiring diagrams or function schematics.
- Special features in service information presentation
In contrast to the presentation on paper, it is possible in the service information to select certain areas (framed in red) and thus to jump to other procedural information or wiring diagrams.
- Selection of connectors → Document: Location and assignment of connectors
- Selection of ground points → Document: Location and assignment of ground points
- Selection of Z-connector sleeves → Document: Location and assignment of Z-connector sleeves
- Selection of PE hands → Reference to further wiring diagrams
- Selection of → document:
Component designations Abbreviations of signal and circuit designations
- Selection of → document:
Component designation "A0 " Use of wiring diagrams with explanation of color key
Location and assignment
- The lists of contents for location and assignment of ground points, solder points and connectors are:
Connectors GF00.19-P-1000ZGA *(B1)
Ground points GF00.19-P-2000ZGA *(B2)
Solder points GF00.19-P-3000ZGA *(B3)
The assignment of components can be obtained from the wiring diagrams specified in the list of contents.
CAN bus presentation
CAN A telematics CAN
CAN B interior CAN
CAN C drive train CAN
CAN D diagnostic CAN
CAN E chassis CAN
CAN G front end CAN
CAN H vehicle dynamics CAN
CAN I drive train sensor CAN
CAN K multifunction CAN
LIN bus presentation
LIN 1 instrument panel LIN
LIN 2 wiper/inside rearview mirror-LIN
LIN B4 SAM-LIN, rear
LIN B5 door LIN, left
LIN B6 door LIN, right
LIN B7 on-board electrical system LIN
LIN B8 climate control LIN
LIN C1 drive-LIN
LIN E1 steering LIN
MOST bus presentation
MOST Media Oriented System Transport