Remove/Install Boost Pressure Control Pressure Transducer - AR09.41-P-2004XGC
Engine 177 in model 463 as of model year 2019
Fig 1: Boost Pressure Control Pressure Transducer Components Location - Engine 177 In Model 463 As Of Model Year 2019
| Risk of injury . Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on avoiding damage through contamination and foreign objects | AH00.00-P-5000-01A | ||
| Remove/install | |||
| 1 | Remove right air filter housing. | AR09.10-P-1152XGC | |
| 2 | Disconnect coolant lines (1). | Fig 2 | |
| 3 | Remove coolant lines (1) from ME-SFI [ME] control unit (N3/10) and seal openings with suitable stop plugs. | AR09.41-P-1311-01AL | |
| Fig 3 | |||
| 4 | Remove vacuum lines (4) from boost pressure control pressure transducer (Y77/1) and seal openings with suitable stop plugs. | Fig 3 | |
| 5 | Release and disconnect electrical connector (2). | ||
| 6 | Remove nuts (3) and remove boost pressure control pressure transducer (Y77/1) in upward direction. | *BA09.41-P-1009-01X | |
| 7 | Install in the reverse order. | ||
| 8 | Perform a ventilation routine on the ME-SFI [ME] control unit (N3/10). | ||
| AD00.00-P-2000-04B | |||
| 9 | Check low-temperature circuit for leak tightness. | AR09.41-P-1011XGA | |
| 10 |
Read out and delete fault memory. | AD00.00-P-2000-04B | |
| Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
| 11 | Carry out engine test run and check engine for proper leaktightness and leaktightness. | ||
| 12 | Install upper engine cover. | AR01.10-P-2405XGC |
CHARGE AIR LINE/CHARGE AIR COOLING
| Number | Designation | Engine 177 | |
|---|---|---|---|
| BA09.41-P-1009-01X | Bolt/nut, pressure transducer to bracket/charge air cooler | Nm | 6 |