Retrofit CA Module Card Reader - AZ82.60-P-0032GW

Model 463 (except 463.202) 

as of model year 2017 up to model year 2019 

with code EI0 (DVB-T2 conversion with ext. Card reader) 

with code EM8 (TV tuner) 

with code EU4 (COMAND Online) 

except code ZW4 (National version for South Korea) 

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove
1	Expose tuner unit far enough to gain access to the electrical connectors.
		Model 463 (except 463.202/242) as of model year 2017 up to model year 2019 with code EI0 (DVB-T2 conversion with ext. Card reader) with code EM8 (TV tuner) with code EU4 (COMAND Online) except code ZW4 (National version for South Korea)	AR82.85-P-7366GW
2	Remove the left load compartment trim.
		Model 463 (except 463.202) as of model year 2017 up to model year 2019 with code EI0 (DVB-T2 conversion with ext. Card reader) with code EM8 (TV tuner) with code EU4 (COMAND Online) except code ZW4 (National version for South Korea)	AR68.30-P-1450GW
	Install
3	Install electrical wiring harness for CA module card reader (1).		AZ82.60-P-0032-01GW
4	Retrofit holder for CA module card reader (1).		AZ82.60-P-0032-02GW
5	Position left load compartment trim in load compartment and guide electrical wiring harness for CA module card reader (1) through previously drilled hole.
6	Install left load compartment trim.
		Model 463 (except 463.202) as of model year 2017 up to model year 2019 with code EI0 (DVB-T2 conversion with ext. Card reader) with code EM8 (TV tuner) with code EU4 (COMAND Online) except code ZW4 (National version for South Korea)	AR68.30-P-1450GW
7	Connect electrical wiring harness to CA module card reader (1) for TV tuner.
8	Fasten CA module card reader (1) onto holder
9	Complete assembly of vehicle.
	Update Vehicle Documentation (VeDoc)
10	Enter special equipment into online vehicle data card.	Code EM (CI+ BOX card reader for DVB-T2)
11	Attach a "CA module card reader retrofitted as per AZ82.60-P-0032GW " note under field organization texts for design group 82.
12	Connect XENTRY Diagnosis and select vehicle using the vehicle identification number (VIN).
			AD00.00-P-2000-04A
13	Perform variant coding using software calibration number (SCN).	TV tuner  Operate CA module card reader (1) in temperature range from 0 to 50°C only. Card reader CA-module (1) switches off automatically beyond this temperature range.
14	Disconnect XENTRY Diagnosis.
			AD00.00-P-2000-04A
	Check
15	Perform function test.