Remove/Install Wiper Motor - AR82.30-P-6800XG
Model 463
as of model year 2019
| Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. | When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m). | AS82.30-Z-0001-01A | |
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmitter range (at least 2 m). | ||
| 2 | Open engine hood and raise to upright position. | AR88.40-P-1000XG | |
| 3 | Remove bottom trim for instrument panel (1) on driver's side. | AR68.10-P-1501XG | |
| 4 | Remove bolts (2) and disconnect wiper linkage (3) from crank of wiper motor (M6/1). | *BA82.30-P-1009-01B | |
| 5 | Remove sealing (4) in engine compartment. | ||
| 6 | Remove bolts (5) and remove cover (6). | ||
| 7 | Disconnect the electrical connector (7). | ||
| 8 | Remove bolts (8) and remove wiper motor (M6/1). | *BA82.30-P-1008-01B | |
| 9 | Install in reverse order. |
WINDSHIELD WIPER
| Number | Designation | Model 461 Model 463 up to model year 2019 | Model 463 as of model year 2019 | |
|---|---|---|---|---|
| BA82.30-P-1008-01B | Screw, windshield wiper motor to firewall | Nm | - | 8 |
WINDSHIELD WIPER
| Number | Designation | Model 461 Model 463 up to model year 2019 | Model 463 as of model year 2019 | |
|---|---|---|---|---|
| BA82.30-P-1009-01B | Screw, wiper linkage to wiper motor (connection) | Nm | - | 9 |