Passenger-Side Seat Occupied Recognition Function - GF91.60-P-1100GWM

Model 463 (except 463.342) 

as of model year 2019 

Function requirements, general 

• Circuit 15R ON

The electronic ignition lock control unit (N73) sends the circuit 15 status via the user interface CAN (CAN HMI) to the supplemental restraint system control unit (N2/10).

Passenger-side seat occupied recognition, general 

The passenger-side seat occupied recognition detects whether the front passenger seat is occupied.

The passenger-side seat occupied recognition function includes the following subfunctions:

• Function sequence for seat occupied recognition 
• Function sequence for issuing status and fault messages 

Function sequence for seat occupied recognition 

Occupation of the front passenger seat by a person or a child seat is determined by the weight, which is applied to the front passenger seat. For this purpose, the weight sensing system (WSS) control unit (N110) measures the pressure of a seat mat filled with silicone. Based on this value, the WSS control unit classifies the weight that is applied to the seat. The WSS control unit transmits the status of the seat occupancy recognition via the seat occupied recognition LIN (LIN E2) to the supplemental restraint system control unit.

The following conditions are defined depending on the weight classification:

• Seat not occupied
• Seat occupied:

• Light weight (e. g. child seat)
• Person recognized

Additional function requirement for issuing status and fault messages 

• Indicator lamp self-test completed successfully

Function sequence for issuing status and fault messages 

The occupancy status of the front passenger seat is shown as follows:

• Front passenger seat occupied (front passenger airbag activated): Front passenger airbag ON indicator lamp (N72/1e3) lights up for approx t= 60 s.
• Front passenger seat not occupied or child seat detected (front passenger airbag inactive):

Front passenger airbag OFF indicator lamp (N72/1e4) lights up permanently.

The Supplemental Restraint System control unit sends the respective request via the user interface CAN, head unit (A26/17), telematics CAN (CAN A), Audio/COMAND control panel A40/9), and LCP LIN (LIN A3) to the upper control panel control unit (N72/1), which directly actuates the corresponding front passenger airbag indicator lamp.

Fault messages 

The following indicator lamps are switched on in the event of a fault (e. g. WSS control unit defective, faulty connection to supplemental restraint system control unit):

• Supplemental Restraint System indicator lamp in the instrument cluster (A1)
• Front passenger airbag OFF indicator lamp

A fault code is also stored in the Supplemental Restraint System control unit and an appropriate message appears in the display of the instrument cluster.

The supplemental restraint system control unit transmits the request to display a corresponding message via user interface CAN to the instrument cluster.

	Electric function schematic for deployment of supplemental restraint system		PE91.60-P-2055-97ZGB
	Overview of system components for supplemental restraint system		GF91.60-P-9996GWM