Remove/Install Side Load Compartment Paneling - AR68.30-P-1185XG
Model 463
as of model year 2019
Shown on left side of vehicle
| Remove/install | |||
| 1 | Remove the load compartment cover guide rail. | AR68.30-P-1100XG | |
| 2 | Remove rear-end center-section trim together with load compartment floor. | AR68.30-P-4786XG | |
| 3 | Remove tie-down eyes (5). | ||
| 4 | Remove cover (6). | ||
| 5 | Unclip the side load compartment trim (1) from the retaining clips (2) and the retaining tabs (3). | ||
| 6 | Remove the side load compartment trim (1). | ||
| 7 | Install in reverse order. |