Remove/Install Armrest Lid On Center Console - AR68.20-P-2370XG
Model 463
as of model year 2019
| Remove/install | |||
| 1 | Remove rear cover at center console. | AR68.20-P-2358XG | |
| 2 | Remove front cover at center console. | AR68.20-P-2350XG | |
| 3 | Remove the screws (1). | ||
| 4 | Disconnect light-emitting diode fiber-optic cable (2) from fiber-optic cable (3). | ||
| 5 | Swivel armrest cover (4) at front in direction of arrow (A) upwards and guide out of guides at center console in direction of arrow (B). | ||
| 6 | Unclip fiber-optic cable (3) by turning and pull out of armrest cover (4). | Only when replacing fiber-optic cable (3) and/or armrest cover (4). | |
| 7 | Install in reverse order. |