Remove And Install DC/AC Converter Control Unit - AR54.21-P-1600XG
Model 463
as of Model year 2019
with code E47 (Socket, 115 V)
Fig 1: DC/AC Converter Control Unit Components Location - Model 463 As Of Model Year 2019 With Code E47
| Risk of death when working on component parts and systems with U >= 30V alternating voltage (AC) or U >= 60V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | AS00.00-Z-0035-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Disconnect ground line of battery. | AR54.10-P-0003XG | |
| 2 | Remove load compartment trim (1) on right side of vehicle. | AR68.30-P-1185XG | |
| 3 | Unscrew the nuts (2) and remove holder (3) with DC/AC converter control unit (N24/3). | ||
| 4 | Disconnect electrical connectors (4). | ||
| 5 | Unscrew nuts (5). | When replacing DC/AC converter control unit (N24/3). | |
| 6 | Remove DC/AC converter control unit (N24/3) from holder (3). | When replacing DC/AC converter control unit (N24/3). | |
| 7 | Install in reverse order. |