Checking Shock Absorber - AR32.25-P-0121LWG

Model 213, 238, 253, 293 

	Check
1	Raise vehicle.		AR00.60-P-1006A
2	Check front shock absorber for external oil leakage.	Model 213 except code 489 (AIRMATIC) Model 238, 253 except code 489 (AIR BODY CONTROL) Model 293 A light oil film on the shock absorber's piston rod is acceptable. In the event of a problem, ↓ Replace front shock absorbers.
		Model 238 except code 489 (AIR BODY CONTROL)	AR32.25-P-1018LWO
		Model 213 except code 489 (AIRMATIC) Model 253 except code 489 (AIR BODY CONTROL) Model 293	AR32.25-P-1018LW
3	Check rear shock absorber for external oil leakage.	A light oil film on the shock absorber's piston rod is acceptable. In the event of a problem, ↓ Replace rear shock absorbers. Model 213, 253, 293	AR32.25-P-0110LW
		Model 238	AR32.25-P-0110LWO
4	Check elastomer bearings of rear shock absorbers.	The elastomer bearings must be seated with zero clearance in the housing eye and they may not be cracked or damaged. In the event of a problem, ↓ Replace rear shock absorbers. Model 213, 253, 293	AR32.25-P-0110LW
		Model 238	AR32.25-P-0110LWO
	Remove
5	Remove front shock absorber.	If damage is suspected that cannot however be detected in installed condition. Model 238 except code 489 (AIR BODY CONTROL)	AR32.25-P-1018LWO
		Model 213 except code 489 (AIRMATIC) Model 253 except code 489 (AIR BODY CONTROL) Model 293	AR32.25-P-1018LW
6	Remove rear shock absorbers.	If damage is suspected that cannot however be detected in installed condition. Model 238	AR32.25-P-0110LWO
		Model 213, 253, 293	AR32.25-P-0110LW
	Check
7	Check piston rod for surface damage, corrosion, bending and unobstructed movement in pilot bushings.	With removed shock absorber. In the event of a problem, ↓ replace shock absorbers.
	Install
8	Install front shock absorber.	If the shock absorber has been removed. Model 238 except code 489 (AIR BODY CONTROL)	AR32.25-P-1018LWO
		Model 213 except code 489 (AIRMATIC) Model 253 except code 489 (AIR BODY CONTROL) Model 293	AR32.25-P-1018LW
9	Install rear shock absorbers.	If the shock absorber has been removed. Model 238	AR32.25-P-0110LWO
		Model 213, 253, 293	AR32.25-P-0110LW