Remove/Install Side Airbag Sensor - AR91.60-P-0710LWR

Model 205.4 

Model 238 

Shown on left side of vehicle on model 205.4 

Fig 1: Side Airbag Sensor Components Location - Model 238 (Shown On Left Side)

Courtesy of MERCEDES-BENZ USA

	Risk of injury  during testing and repair operations related to pyrotechnical components	Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.	AS91.00-Z-0008-01A
Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Disconnect battery ground line	Model 238	AR54.10-P-0003LWO
		Model 205.4	AR54.10-P-0003LW
2	Remove seat cushion in rear	Model 205.4 except code 248 (Rear seat with integrated child seat) except code P10 (Taxi package Germany) Model 238	AR91.12-P-1020LW
3	Remove front door sill (1)		AR68.30-P-4100CLW
4	Detach edge guard (2) in area of rear door sill (3)	Model 205.4
5.1	Remove rear door sill (3)	Model 205.4
5.2	Remove lower side trim in rear	Model 238
			AR68.30-P-4784LWO
6	Push floor covering (4) in area of B-pillar to one side
7	Remove bolt (5)	Bolt, sidebag sensor to B-pillar	*BA91.60-P-1008-01O
8	Remove left sidebag sensor (A53) or right sidebag sensor (A54) and disconnect the electrical connector (6)
9	Install in the reverse order