Remove/Install Seatbelt Extender - AR91.45-P-1000LWR
Model 205.4
Model 238.4
Shown on left side of vehicle on model 205.4
| Remove/install | |||
| 1 | Remove side paneling in rear | Model 205.4 | AR68.30-P-4784LWR |
| Model 238.4 | AR68.30-P-4784LWO | ||
| 2 | Loosen nut (2) and remove screw/bolt (3) | ||
| 3 | Remove screw/bolt (4), remove belt guide (5) and hang down on seat belt | *BA91.40-P-1002-01U | |
| 4 | Loosen speaker with bracket far enough to access electrical connector (6) | Model 238.4 with code 810 (Sound system) | |
| 5 | Disconnect electrical connector (6) and expose electrical line | ||
| 6 | Remove seat belt extender (1) | ||
| 7 | Install in the reverse order |
SEAT BELTS/EMERGENCY TENSIONING RETRACTORS
| Number | Designation | Model 205.4 | Model 238 | |
|---|---|---|---|---|
| BA91.40-P-1002-01U | Bolt, front belt guide bracket | Nm | 30 | 30 |