Remove/Install Front Axle Brake Caliper Support - AR42.10-P-0222LWO
Model 238
1-piston floating caliper brake
| Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Notice | Notes on threaded connections fastened using a tightening angle-based tightening process | AH00.00-P-0020-01A | |
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| Notice | Notes on repairs to brake system | AH42.00-P-0003-01A | |
| Notes on handling, transport and storage of composite brake disks | AH42.10-P-9406-12LF | ||
| Remove | |||
| 1 | Detach brake caliper and secure free of tension to vehicle with lines still connected | Do not subject the brake hose and electrical line to tension and do not kink them. The brake hose and the electrical line can otherwise be damaged. |
AR42.10-P-0070LWO |
| 2 | Remove front axle brakepads | AR42.10-P-1610LWO | |
| 3 | Unscrew bolts (1) and remove brake caliper support (2) | ||
| Check | |||
| 4 | Check brake caliper support (2) for damage | When reinstalling brake caliper support (2). If a problem arises ↓ Replace brake caliper support (2). |
|
| 5 | Check guide pins (3, 4) for damage and unobstructed movement | When reinstalling brake caliper support (2). If a problem arises ↓ Replace brake caliper support (2). |
|
| Install | |||
| 6 | Clean contact surfaces (arrows) on brake caliper support (2) | When reinstalling brake caliper support (2). Do not use sharp-edged or pointed objects. Otherwise, the brake caliper support (2) will be damaged. Assembly cleaner |
*BR00.45-Z-1028-04A |
| 7 | Position brake caliper support (2) and tighten bolts (1) | *BA42.10-P-1001-10X | |
| 8 | Install front axle brakepads | AR42.10-P-1610LWO | |
| 9 | Install brake caliper | Do not subject the brake hose and electrical line to tension and do not kink them. The brake hose and the electrical line can otherwise be damaged. |
AR42.10-P-0070LWO |
FRONT AXLE BRAKE CALIPER
| Number | Designation | Model 238 (except 238.361/461) | Model 238.361/461 | |||
|---|---|---|---|---|---|---|
| BA42.10-P-1001-10X | Bolt, brake caliper/brake caliper support to steering knuckle | M12 | Nm | - | - | |
| M14 | Stage 1 | Nm | 80 | 150 | ||
| Stage 2 | ∠° | 45 | 45 | |||
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1028-04A | Assembly cleaner | A 000 986 56 01 |