Remove/Install Low Temperature Water Circuit Radiator - AR09.41-P-6935OLC
Engine 274, 654 in model 213, 238
| Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses. |
AS20.00-Z-0001-01A | |
| Remove/install | |||
| 1 | Drain off coolant. | AR20.00-P-1142OLC | |
| 2 | Remove radiator. | Model 238 with engine 274.9, 654 | AR20.20-P-3865OLA |
| Model 213 with engine 274, 654 | AR20.20-P-3865OLC | ||
| 3 | Remove cold air guide (4) from radiator package. | ||
| 4 | Remove high-voltage battery cooling system radiator. | Engine 274 in model 213.050 with code ME06 (Hybrid drive 60 kW variant (incl. plugin)) Engine 654 in model 213.016/216 with code ME05 (HYBRID DRIVE 80KW VARIANT (INCLUDING PLUGIN)) Engine 654 in model 213.016/216 with code ME05 (HYBRID DRIVE 80KW VARIANT (INCLUDING PLUGIN)) |
AR08.50-P-0126OLC |
| Engine 274 in model 213.050 with code ME06 (Hybrid drive 60 kW variant (incl. plugin)) | AR20.20-P-0030MRD | ||
| 5 | Remove coolant hose (2) from low-temperature circuit radiator (1). | AR20.20-P-7441-01RQ | |
| 6 | Remove condenser (5) from radiator supports (3) and secure against falling down with lines connected on the vehicle. | ||
| 7 | Remove low-temperature circuit radiator (1) with radiator supports (3) upwards. | ||
| 8 | Remove radiator supports (3) from low-temperature circuit radiator (1). | When replacing the low-temperature circuit radiator (1). | |
| 9 | Install in the reverse order. |