Perform Wheel Alignment Check - AR40.20-P-0200LW
Model 205
Model 213
Model 253
Model 293
| Check | |||
| 1 | Check condition of vehicle. | The specified tolerances of vehicle specified values are only for the test. If the vehicle is adjusted, the specified values should be aimed for. |
|
| 2 | Check condition and tire tread depth of tires. | ||
| AP40.10-P-4052B | |||
| 3 | Check rims for damage. | ||
| 4 | Check and correct tire pressure. | ||
| AP40.15-P-4061A | |||
| 5 | Check vehicle underside for damage and corrosion of suspension, chassis and load-bearing body parts. | ||
| Model 205 | AP60.00-P-0051EW | ||
| Model 213 | AP60.00-P-0051D | ||
| Model 253 (except 253.99) | AP60.00-P-0051C | ||
| Model 253.99 | AP60.00-P-0051K | ||
| Model 293 | AP60.00-P-0051V | ||
| 6 | Check condition of the steering mechanism. | ||
| Model 205, 213, 253 | AP46.00-P-4651A | ||
| Model 293 | AP46.00-P-4651H | ||
| 7 | Check front axle joints for play and check dust boots for damage. | ||
| Model 205, 213, 253 | AP33.10-P-3358A | ||
| Model 293 | AP33.10-P-3358H | ||
| 8 | Check rear axle joints for play and check dust boots for damage. | ||
| Model 293 | AP35.20-P-3552I | ||
| Model 205, 213, 253 (except 253.99) | AP35.20-P-3552A | ||
| Model 253.99 | AP35.20-P-3552FC | ||
| 9 | Check condition of shock absorbers and springs. | ||
| Model 293 | AP32.25-P-3255H | ||
| Model 253 | AP32.25-P-3255E | ||
| Model 205, 213 | AP32.25-P-3255A | ||
| Preparatory tasks | |||
| 10 | Print out form for wheel alignment measurement. | If a visual wheel alignment measurement is performed. | |
| Wheel Alignment Form | OF40.20-P-3000-01B | ||
| 11 | Select drive program "Sport". | Model 205 with engine 177 Model 205 with engine 276 with code M005 (Vehicles with 4MATIC/all-wheel drive) with code M016 (Uprated engine) Model 213 with engine 177 Model 213 with engine 276 with code M005 (Vehicles with 4MATIC/all-wheel drive) with code M016 (Uprated engine) |
|
| 12 | Drive the vehicle onto measuring station and secure using parking brake. | ||
| 13 | Unlock turn and slip plates. | ||
| 14.1 | Raise vehicle level and lower again. | Model 205, 213, 253 with code 489 (AIRMATIC Dual Control/semi-active air suspension) | |
| 14.2 | Rock vehicle to settle suspension on front and rear axles several times. | Model 205, 213, 253 except code 489 (AIRMATIC Dual Control/semi-active air suspension) | |
| 14.3 | Rock vehicle on front axle several times to settle suspension. | Model 293 | |
| 15 | Switch off easy entry and exit feature. | Model 205, 253, 293 with code 275 (Driver's seat, electrically adjustable with memory function) Model 213 with code 275 (Memory Package (driver's seat, steering column and mirror)) |
|
| 16 | Lower window of driver's door. | ||
| 17 | Install the brake pedal jack with the adapter for brake pedal jack between the brake pedal and the driver's seat. | Protect contact surfaces of Otherwise, the brake pedal and driver's seat may be damaged. |
|
| Fig 1 | |||
| Fig 3 | |||
| 18 | Determine vehicle level on front and rear axle using electronic inclinometer. | AR40.20-P-0301LW | |
| 19 | Attach quick clamping devices at front and rear wheels and remove tensioning levers. | AR40.20-P-0230SX | |
| 20 | Attach wheel mirrors or measurement pickups. | ||
| 21 | Attach measuring heads. | ||
| Measure | |||
| 22 | Carry out input measurement. | ||
| 23 | Compare determined values with the specified values. | Model 293 | AR40.20-P-0203EQC |
| Model 253 | AR40.20-P-0203LWB | ||
| Model 213 | AR40.20-P-0203LWA | ||
| Model 205 Model 213.064/088/089/264/288/289 Model 253.364/388/389/964/988/989 The camber and caster on the front axle are not adjustable. Model 213 (except 213.088/089/288/289) Model 253 (except 253.388/389/988/989) Model 293 The camber on the rear axle is not adjustable. |
AR40.20-P-0203LWC | ||
| Adjust | |||
| 24 | Adjust camber on rear axle. | According to results of initial measurement. Model 205.386/387/486/487 |
AR40.20-P-0202LWI |
| Model 213.088/089/288/289 | AR40.20-P-0202MNE | ||
| Model 253.388/389/988/989 | AR40.20-P-0202LWX | ||
| 25 | Adjust toe on rear axle. | According to results of initial measurement. | AR40.20-P-0261LW |
| 26 | Adjust camber and caster on front axle. | According to results of initial measurement. | |
| Model 205 (except 205.064/086/087/264/286/287/364/386/387/464/486/487) Model 213 (except 213.064/088/089/264/288/289) Model 253 (except 253.364/388/389/964/988/989) Model 293 |
AR40.20-P-0263LW | ||
| 27 | Adjust toe on front axle. | According to results of initial measurement. | AR40.20-P-0264LW |
| Measure | |||
| 28 | Carry out output measurement. | ||
| Concluding tasks | |||
| 29 | Detach measuring heads. | ||
| 30 | Remove wheel mirrors or measurement pickups. | ||
| 31 | Attach tensioning levers and remove quick clamping devices. | ||
| 32 | Remove brake pedal jack with adapter for brake pedal jack. | ||
| 33 | Lock turn and slip plates. | ||
| 34 | Drive vehicle off measuring system. | ||
| 35 | Switch on easy entry and exit feature. | Model 205, 253, 293 with code 275 (Driver's seat, electrically adjustable with memory function) Model 213 with code 275 (Memory Package (driver's seat, steering column and mirror)) |
|
| 36 | Check headlamp adjustment. | ||
| Model 293 | AP82.10-P-8260KA | ||
| Model 213 | AP82.10-P-8260J | ||
| Model 205, 253 | AP82.10-P-8260E |