Remove/Install Elastomer Bearing Of Suspension Of Rear Axle Carrier - AR35.10-P-0043LWA

Model 205.064/086/087/264/286/287/364/386/387/486/487 

	Notes on repair work on suspension components		AH00.00-P-0100-01A
	Remove/install
1	Remove rear axle		AR35.10-P-0010LW
2	Remove front elastomer bearing	Always replace elastomer bearings as pair	AR35.10-P-0040-02LW
		Lubricant, rubber assembly 1 l	*BR00.45-Z-1010-06A
		Extraction and insertion tool	Fig 1
		Hydraulic hose (complete)	Fig 6
		Hollow cylinder	Fig 4
		Hand pump	Fig 2
		Securing belt	Fig 5
3	Remove rear elastomer bearing	Always replace elastomer bearings as pair	AR35.10-P-0040-03LW
		Lubricant, rubber assembly 1 l	*BR00.45-Z-1010-06A
		Hydraulic hose (complete)	Fig 6
		Hollow cylinder	Fig 4
		Hand pump	Fig 2
		Extraction and insertion tool	Fig 3
		Securing belt	Fig 5
4	Install in the reverse order

Fig 1: Identifying Extraction And Insertion Tool (205 589 00 43 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Hand Pump (652 589 00 33 21)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Extraction And Insertion Tool (204 589 00 43 00)

Courtesy of MERCEDES-BENZ USA

Fig 4: Identifying Hollow Cylinder (652 589 00 33 22)

Courtesy of MERCEDES-BENZ USA

Fig 5: Identifying Securing Belt (001 589 01 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 6: Identifying Hydraulic Hose - Complete (652 589 00 33 23)

Courtesy of MERCEDES-BENZ USA

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1010-06A	Lubricant, rubber assembly 1 l	A 000 989 03 67