Remove/Install Hermes Control Unit - AR82.95-P-0019LWM

Model 205 

as of model year 2019 

with code 360 (HERMES UMTS) 

Model 205 

as of model year 2019 

with code 362 (HERMES communications module LTE) 

Fig 1: Hermes Control Unit Component Location - Model 205 With Code(s) 360 And 362

Courtesy of MERCEDES-BENZ USA

Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Carry out commissioning of HERMES control unit (N112/9).	When replacing the HERMES control unit (N112/9).
			AD00.00-P-2000-04B
2	Switch off ignition and store transmitter key outside of transmission range (min. 2 m).
3	Release head unit (A26/17) and pull toward rear.	Model 205 as of model year 2019 with code 360 (HERMES UMTS) with code 506 (Audio 20 NTG 5.5 radio) Model 205 as of model year 2019 with code 360 (HERMES UMTS) with code 531 (COMAND APS) Model 205 as of model year 2019 with code 362 (HERMES communications module LTE) with code 506 (Audio 20 NTG 5.5 radio) Model 205 as of model year 2019 with code 362 (HERMES communications module LTE) with code 531 (COMAND APS)	AR82.85-P-1101LWM
4	Disconnect electrical connectors (3, 4) at HERMES control unit (N112/9).	The number of electrical connectors (4) can vary depending on the equipment installed.
5	Unclip HERMES control unit (N112/9) from holder (2) and remove.
6	Install in the reverse order.