LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> C300 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 367 (Brakes - Hydraulic & Mechanical System - 253 Chassis 2 Of 3) >> Testing & Repair >> Remove/Check/Install Front Axle Brake Pads >> Remove/ Check/Install Front Axle Brake Pads - AR42.10-P-1610LWD

Remove/ Check/Install Front Axle Brake Pads - AR42.10-P-1610LWD

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205 

with code U70 (red-painted brake callipers) 

except code B06 (Silver brake calipers) 

except code B07 (AMG - ceramic brake system) 

6-piston fixed-caliper brake 

Model 213 

with code U70 (red-painted brake callipers) 

except code B06 (Silver brake calipers) 

except code B07 (AMG - ceramic brake system) 

6-piston fixed-caliper brake 

Model 253 

with code U70 (AMG high-performance composite braking system) 

except code B06 (AMG high-performance braking system) 

except code B07 (AMG - ceramic brake system) 

6-piston fixed-caliper brake 

Fig 1: Front Axle 6-Piston Fixed-Caliper Brake Linings/Pads Components Location - Model 253 With Code U70 Except Code B06; B07
G14547105Courtesy of MERCEDES-BENZ USA
DANGER Risk of accident  when commissioning the vehicle due to a lack of braking effect when the service brake is operated for the first time after repair work. Before starting the engine, actuate brake pedal several times until pressure is built up and maintained in the brake system. AS42.50-Z-0002-01A
WARNING Risk of injury.  Skin or eye injuries may result when handling hot or glowing objects. Wear protective gloves, protective clothing and safety glasses, if necessary. AS00.00-Z-0002-01A
CAUTION Risk of poisoning  from swallowing brake fluid. Risk of injury  from skin and eye contact with brake fluid Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. AS42.50-Z-0001-01A
Notice  Notes on handling, transport and storage of composite brake discs   AH42.10-P-9406-12LF
Notice  Notes on self-locking nuts and Bolts   AH00.00-P-0001-01K3A
Notice  Notes on repairs to brake system   AH42.00-P-0003-01A
Notice  Brake fluid notes   AH42.50-P-0001-01A
REMOVINGINSTALLING Remove/install     
1 Open service flap above expansion reservoir for brake fluid    
2 Clean area around cap on expansion reservoir for brake fluid Assembly cleaner *BR00.45-Z-1028-04A 
3 Unscrew the cap on the brake fluid expansion reservoir and suction off some brake fluid IMPORTANT This prevents the expansion reservoir overflowing when the brake piston is pushed back.  
4 Remove front wheels   AR40.10-P-1102A
5 Create access to electric line of right front brakepad wear sensor and disconnect electrical connector IMPORTANT Pay attention to the routing of the electric line of the right front brakepad wear sensor.  
6 Remove Bolt (6) and take off support (7)    
7 Use punch to knock out pin (5) and remove retaining spring (8) INSTALLATION IMPORTANT : Pound in pins (5) up to end stops.
Check retaining spring (8) is correctly seated.
 
8 Press back brake pistons slightly using pusher tool IMPORTANTSPECIAL TOOL Attach pusher tool to the elevations of the brake linings (3).
SPECIAL TOOL Resetting device
Fig 2
9 Remove brakepads (3) INSTALLATION IMPORTANT : Only brakepads (3) approved by Mercedes-Benz may be installed, and only as complete sets. Do not apply brake paste or lubricants to the brake linings (3) and brake calipers (1).  
INSPECT Check     
10 Check pins (5), support (7) and retaining spring (8) for damage and condition If a problem arises

Replace the pins (5) or support (7) or retaining spring (8).
 
11 Check brake linings (3) for wear and condition    
REFER TO MAINTENANCE   Model 253 with code U70 (AMG high-performance composite braking system) except code B06 (AMG high-performance braking system) except code B07 (AMG - ceramic brake system) 6-piston fixed-caliper brake AP42.10-P-4252D
REFER TO MAINTENANCE   Model 205 with code U70 (red-painted brake callipers) except code B06 (Silver brake calipers) except code B07 (AMG - ceramic brake system) 6-piston fixed-caliper brake AP42.10-P-4252CAA
REFER TO MAINTENANCE   Model 213 with code U70 (red-painted brake callipers) except code B06 (Silver brake calipers) except code B07 (AMG - ceramic brake system) 6-piston fixed-caliper brake
In event of damage or excessive wear

Replace brakepads (3).
IMPORTANT Replace brakepads (3) as a complete set only.
AP42.10-P-4252E
12 Check brake disc for wear and condition    
REFER TO MAINTENANCE   Model 205 with code U70 (red-painted brake callipers) except code B06 (Silver brake calipers) except code B07 (AMG - ceramic brake system) 6-piston fixed-caliper brake AP42.10-P-4258EW
    Model 213 with code U70 (red-painted brake callipers) except code B06 (Silver brake calipers) except code B07 (AMG - ceramic brake system) 6-piston fixed-caliper brake Model 253 with code U70 (AMG high-performance composite braking system) except code B06 (AMG high-performance braking system) except code B07 (AMG - ceramic brake system) 6-piston fixed-caliper brake
In event of damage or excessive wear

Replace brake discs.
AR42.10-P-0120LWG 
    IMPORTANT Replace brake discs as a complete set only. AR42.10-P-0220EWE 
13 Check brake caliper (1) and dust boots of brake piston for leak tightness and damage If a problem arises

Replace brake caliper (1).
AR42.10-P-0070LWD 
14 Press back brake pistons using pusher tool IMPORTANT Secure remaining brake pistons using two SPECIAL TOOL wedges against slipping out.
SPECIAL TOOL Resetting device
Fig 2
    SPECIAL TOOL Wedge
With sluggish brake pistons

Replace brake caliper (1).
Fig 3
      AR42.10-P-0070LWD 
CLEANING Clean     
15 Clean contact surfaces of brake linings (3) on brake caliper (1) and brake piston NOTES Do not use sharp-edged or pointed objects. The brake caliper (1) or the dust boots of the brake pistons can otherwise be damaged.
Assembly cleaner
*BR00.45-Z-1028-04A 
16 Pull front right brakepad wear sensor out of backing plate of brakepad (3) When replacing the brakepads (3) or replacing the right front brake wear sensor
IMPORTANT Observe installation position of front right brakepad wear sensor.
 
17 Install in the reverse order    
18 Operate the brake pedal several times until brake linings (3) contact the brake discs IMPORTANT Firm resistance should be noticeable at the brake pedal.  
INSPECT Check     
19 Check/correct brake fluid level in expansion reservoir    
REFER TO MAINTENANCE   Model 205 with code U70 (red-painted brake callipers) except code B06 (Silver brake calipers) except code B07 (AMG - ceramic brake system) 6-piston fixed-caliper brake AP42.10-P-4210CAA
REFER TO MAINTENANCE   Model 213 with code U70 (red-painted brake callipers) except code B06 (Silver brake calipers) except code B07 (AMG - ceramic brake system) 6-piston fixed-caliper brake Model 253 with code U70 (AMG high-performance composite braking system) except code B06 (AMG high-performance braking system) except code B07 (AMG - ceramic brake system) 6-piston fixed-caliper brake AP42.10-P-4210B
20
REFER TO MAINTENANCE
Carry out brake test on the test stand   AP42.00-P-4290BA
Fig 2: Identifying Resetting Device (000 589 52 43 00)
G11128859Courtesy of MERCEDES-BENZ USA
Fig 3: Identifying Wedge (601 589 07 63 00)
G13668561Courtesy of MERCEDES-BENZ USA
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1028-04A Assembly cleaner A 000 986 56 01