LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> C300 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Brakes - Hydraulic & Mechanical System - 213 Chassis 2 Of 2) >> Maintenance >> Assess Condition Of Brake Linings >> Assess Condition Of Brake Linings - AP42.10-P-4252E

Assess Condition Of Brake Linings - AP42.10-P-4252E

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2023 Mercedes-Benz E63 S AMG, 2023 Mercedes-Benz E53 AMG, 2023 Mercedes-Benz E350, 2022 Mercedes-Benz E53 AMG, and 2022 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.

Model 213 

G13746500Courtesy of MERCEDES-BENZ USA
G13746501Courtesy of MERCEDES-BENZ USA
WARNING Risk of injury.  Skin or eye injuries may result when handling hot or glowing objects. Wear protective gloves, protective clothing and safety glasses, if necessary. AS00.00-Z-0002-01A
  Notes on repairs to brake system   AH42.00-P-0003-01A
  Notes on handling, transport and storage of composite brake disks   AH42.10-P-9406-12LF
  Notes on handling, transport and storage of ceramic brake disks   AH42.10-P-9406-13A
INSPECT Check     
1 Assess bake lining thickness (1) of brake linings at front axle IMPORTANT If necessary, use a flashlight (2) or a mirror (3). The thickness of the pad backing plate can be used as a guide when assessing brake lining thickness (1).
Front axle. Brake lining
If, in exceptional cases, assessment by means of visual inspection is not possible.
↓
Detach wheel and tire assemblies and inspect them, subject to separate repair order.		 *BE42.10-P-1001-06C 
2 Assess bake lining thickness (1) of brake linings at rear axle IMPORTANT If necessary, use a flashlight (2) or a mirror (3). The thickness of the pad backing plate can be used as a guide when assessing brake lining thickness (1).
Rear axle. Brake pad
If, in exceptional cases, assessment by means of visual inspection is not possible.
↓
Detach wheel and tire assemblies and inspect them, subject to separate repair order.		 *BE42.10-P-1001-18A 
3 Determine likely remaining distance of brake linings NOTES
If the wear limit for the brake linings is reached, replace the brake linings subject to a separate repair order.
Otherwise the braking effect may be impaired and people, property and environmental damage may result!
IMPORTANT To determine the prospective remaining distance for each axle, refer to the brakepad with the least brakepad thickness (1).
In order to avoid an unscheduled workshop visit between services, determine the remaining distance of the present brakepads.
If the remaining distance determined is less than the next service interval, advise the customer to replaced the brakepads before the due service date.		 AP42.10-P-4253-03EW
CHECK VALUES FOR FRONT AXLE BRAKE LINING

Number Designation Model 213 (except 213.088/089/288/289) Model 213.088/089/288/289
BE42.10-P-1001-06C Brake lining Brake pad, new mm 13 10
Pad backing plate mm 6 6
Wear limit mm 2 2
Wear indicator activated (if installed) mm 2-3 2-3
CHECK VALUES FOR REAR AXLE BRAKEPAD

Number Designation Model 213 (except 213.088/089/288/289) Model 213.088/089/288/289 except code B07 Model 213.088/089/288/28 9 with code B07
BE42.10-P-1001-18A Brake pad Brake pad, new mm 11 12
Pad backing plate mm 6 6
Wear limit mm 2 2
Wear indicator activated (if installed) mm 2-3 2-3
scientia non olet · About LEMON Manuals