LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> C300 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Overall Vehicle - 213 Chassis 6 Of 8) >> Capacities & Specifications >> (Specified Anti-Corrosion Protection/Antifreeze (CV) - Overview - BB00.40-P-0320-02A)

(Specified Anti-Corrosion Protection/Antifreeze (CV) - Overview - BB00.40-P-0320-02A)

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2023 Mercedes-Benz E63 S AMG, 2023 Mercedes-Benz E53 AMG, 2023 Mercedes-Benz E350, 2022 Mercedes-Benz E53 AMG, and 2022 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.

Model all (BUS, Heavy transporter, TRUCK, UNIMOG) 

    Coolant Specification sheets BB00.40-P-0310-01A 
Prescribed Specification sheet for service fill anti-corrosion agents/antifreeze Commercial vehicle engines - Mercedes-Benz
MB Specification sheets for Operating Fluids, Specification sheet 312 325, 326
  .0 .0 .3 .5
Major assembly model series without  secondary water retarder (SWR) OM 300
  OM 400
  OM 904 - 926
  OM 934, 936 - - -
  OM 457, 460
  OM 500
  OM 470 - 473 - - -
Major assembly model series with secondary water retarder (SWR) - - -
Prescribed Specification sheet for service fill anti-corrosion agents/antifreeze Car engines in commercial vehicles - Minibus
MB Specification sheets for Operating Fluids, Specification sheet 325, 326
  .6
OM 654
NOTE: As a general rule, the approved anti-corrosion agents/antifreeze (MB Specification sheet) can be found in the respective operator's manual for the vehicle.

This table contains only the anti-corrosion agents/antifreeze for engines that were in production in the period of the last 15 years. Information on unlisted or older engine models can be found in the vehicle's operator's manual or the maintenance procedures.

Ensure that concentrated anti-corrosion agents/antifreeze (MB Specification sheets 325.x) are mixed with suitable water as per the specification from MB Specification sheet 310.1 before being used in the cooling circuit. Ready-mixes (MB Specification sheets 326.x) may not be mixed with water.

• Approval

- May not be used.