Retrofit Rain Sensor Of Windshield Wiper System - AN82.30-P-0001LW
Model 205
MODIFICATION NOTES
| 6.8.15 | CGW [ZGW] central gateway replaced with electronic ignition lock (EZS) | Step 4 |
| Initial startup | |||
| 1 | Order retrofitting via parts ordering process, specifying vehicle identification number (FIN) |
|
|
| 2 | Connect diagnostic system and select vehicle using FIN | ||
| AD00.00-P-2000-04B | |||
| 3 | Check if CODE 345 (Windshield wipers with rain sensor) is entered on the on-line vehicle data card | If not: ↓ Enter CODE 345 (Windshield wipers with rain sensor) on the on-line vehicle data card. |
|
| 4 | Carry out variant coding of electronic ignition lock (EZS) using software calibration number (SCN) | ||
| 5 | Disconnect diagnostic system | ||
| AD00.00-P-2000-04B | |||
| 6 | Perform function test of rain sensor | ||
| 7 | Attach note "Rain sensor of windshield wiper system retrofitted as per " in Vehicle Documentation (VeDoc) under field organization texts to design group 82 | AN82.30-P-0001LW |
PARTS ORDERING NOTE
| Part no. | Designation | Quantity |
|---|---|---|
| KG 99 (Refer to the appropriate EPC) | Parts kit for rain sensor software retrofit | 1 |