Comfort Lighting, Basic Function - GF82.10-P-1025A
Model All (CAR)
Model All (4xWD)
Overview
This document contains the following information
- General
- Function Requirements
- Function
- Exit vehicle
- Locate vehicle
- Presentation lighting, rear lamps, model 167.9
General
The comfort lighting illuminates the area surrounding the vehicle to enable to exit securely and locate the vehicle in the dark. The ambient lighting is operated via the multimedia system.
Function Requirements
- Surround lighting function activated.
- Light sensor reports darkness detected.
- Exterior lights switch in "AUTO" position.
Function
The following light functions are activated with the comfort lighting:
- Standing lights, front with higher output
- Outside mirror surround lighting (vehicles with Mirror Package)
- Door handle surround lighting (vehicles with KEYLESS-GO)
- Step surround lighting (vehicles with MAYBACH version)
Exit Vehicle
After the driver switches off the engine (change from circuit 15 ON to circuit 15R ON), the surround lighting is activated for the configured period.
Opening a vehicle door or the trunk lid or the liftgate starts the function again. This also applies if all the vehicle doors are closed again.
Surround lighting is switched off by switching on circuit 15
Locate Vehicle
When the vehicle is unlocked the surround lighting is activated for the duration of approx. 40 s (time for automatic relocking).
In addition, various interior lights are switched on.
If the vehicle is started within a period of 40 s, a switch is made from surround lighting to automatic driving lights.
Presentation Lighting, Rear Lamps Model 167.9
The light sources in the rear lamps are switched on and off with a delay when the surround lighting is activated. This creates an impression of a curtain being opened when the vehicle is located or closed when the vehicle is exited.
| Function schematics | |||
| Function schematic, illuminate vehicle surroundings | Model 118, 177, 243, 247 | PE82.10-P-2515-97A | |
| Model 167 Model 293 |
PE82.10-P-2515-97B | ||
| Model 206, 232, 254 | PE82.10-P-2515-97C | ||
| Model 213, 238, 257, 290 as of model year 2021 | PE82.10-P-2515-97D | ||
| Model 223, 295, 296, 297 | PE82.10-P-2515-97E | ||
| Further basic functions | |||
| Actuate standing lights and parking lights, basic function | GF82.10-P-1000A | ||
| Interior lighting, basic function | GF82.20-P-9900A | ||
| Basic function of signal acquisition and actuation module | Model 118, 177, 243, 247 | GF54.21-P-9895A | |
| Basic function of signal acquisition and actuation module at front | Model 167, 206, 223, 232, 254, 293, 295, 296, 297 Model 213, 238, 257, 290 as of model year 2021 |
GF54.21-P-9896A | |
| Basic function of signal acquisition and actuation module at rear | Model 167, 206, 223, 232, 254, 293, 295, 296, 297 Model 213, 238, 257, 290 as of model year 2021 |
GF54.21-P-9867A | |
| Headlamp control unit, basic function | Model All (CAR) | GF82.10-P-9890A | |
| Rain and light sensor, basic function | Model All (CAR) | GF54.21-P-2005A | |
| Front lamp unit, basic function | GF82.10-P-2000A | ||
| Rear lamp unit, basic function | GF82.10-P-2004A | ||
| Outside mirror, basic function | GF88.79-P-2014A | ||
| KEYLESS-GO door handle, basic function | Model all (CAR) with code 889 (KEYLESS-GO) | GF80.61-P-2003A | |
| Exterior lights switch, basic function | GF82.10-P-2022A |