Remove/install left footwell bass speaker - AR82.62-P-7820RK
MODEL 231
| Remove/install | |||
| 1 | Bring driver seat into the rearmost seat position | ||
| 2 | Switch off ignition and remove transmitter key (A8/1) or KEYLESS-GO start/stop button (S2/3) from electronic ignition lock control unit (N73) | ||
| 3 | Remove brake pedal | AR29.10-P-4597RK | |
| 4 | Remove accelerator pedal | AR30.12-P-1321RK | |
| 5 | Remove Active Body Control control unit (N51/2) | With code 487 (Active Body Control (ABC)) | AR32.50-P-0023RK |
| 6 | Remove door sill molding | AR68.30-P-4100RK | |
| 7 | Loosen rubber door seal (1) in area of left entrance | ||
| 8 | Unclip floor covering (2) | ||
| 9 | Fold back floor covering (2) | Fold back floor covering (2) carefully. Otherwise the foam filling of the floor covering (2) can tear. |
|
| 10 | Remove footrest (5) | ||
| 11 | Disconnect electrical connector (7) | ||
| 12 | Remove left footwell bass speaker (H4/42 or H4/88) | ||
| 13 | Install in the reverse order |