Remove/Install Passenger Airbag Unit - AR91.60-P-0680LF
Model 222.0/1/9
| Risk of injury during testing and repair operations related to pyrotechnically components | Do not expose pyrotechnically component parts to temperatures above 100°C or 212°F. Disconnect current supply when working on such component parts. | AS91.00-Z-0008-01A | |
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Information, assessment and legal requirements when working with, handling and storing pyrotechnically components | AH91.00-Z-0000-10A | ||
| Remove/install | |||
| 1 | Switch on ignition and store transmitter key outside of transmission range (min. 2 m) | ||
| 2 | Disconnect ground line to battery | AR54.10-P-0003LF | |
| 3 | Remove glove compartment (1) | AR68.10-P-1400LF | |
| 4 | Cover door sill and door sill molding with door sill protector 000 588 08 98 00 Cover | ||
| WS98.00-P-0014B | |||
| 5 | Remove right A-pillar paneling | AR68.30-P-4050LF | |
| 6 | Unscrew bolt (5) from instrument panel | ||
| 7 | Release and disconnect electrical connectors (arrow A) from front passenger airbag (2) | ||
| 8 | Release and disconnect electrical connectors (arrows B) from front passenger airbag (2) | ||
| 9 | Unscrew nuts (3) | *BA91.60-P-1001-011 | |
| 10 | Lift instrument panel with assistant far enough to enable the front passenger airbag (2) to be removed | ||
| 11 | Remove front passenger airbag (2) together with bracket (4) | ||
| 12 | Install in the reverse order | ||
| Check | |||
| 13 | Check and erase vehicle fault memory using diagnostic system | When replacing front passenger airbag (2). | |
| AD00.00-P-2000-04B |
AIRBAG
| Number | Designation | Model 222 | |
|---|---|---|---|
| BA91.60-P-1001-011 | Nut, front passenger airbag unit to instrument panel | Nm | 5 |