Remove/Install Rear Seat Belt Buckle - AR91.40-P-1516LF

Model 222.0/1/9 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove seat cushion	MODEL 222.0/1 without CODE 223 (Electrically adjustable rear bench seat) without CODE 224 (Rear individual seat design)	AR91.12-P-1020LF
		MODEL 222.0/1/9 with CODE 223 (Electrically adjustable rear bench seat) MODEL 222.0/1/9 with CODE 224 (Rear individual seat design)	AR91.12-P-1020LFA
2.1	Remove center seat belt (3)	MODEL 222.0/1/9 without CODE 224 (Rear individual seat design) When removing the left seat belt buckle (1) The seat belt buckle (1) and seat belt (3) form a structural unit and they can only be removed together.	AR91.40-P-0683LF
2.2	Unscrew bolt (2)	MODEL 222.0/1/9 with CODE 224 (Rear individual seat design) Bolt/nut for rear belt buckle	*BA91.40-P-1008-01T
3	Expose and disconnect electrical connector of electrical line (4)
4	Remove belt buckle (1)	Ensure correct installation position of seat belt buckle (1).
5	Install in the reverse order

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		MODEL 222
BA91.40-P-1008-01T	Bolt/nut for rear belt buckle	Nm	35