LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2020 >> GLE580 >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Interior Equipment - 205 Chassis) >> Testing & Repair >> Remove/Install Handle On Roof - AR68.30-P-4330NKB

Remove/Install Handle On Roof - AR68.30-P-4330NKB

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2023 Mercedes-Benz C43 AMG, 2022 Mercedes-Benz C43 AMG, 2021 Mercedes-Benz C43 AMG, 2020 Mercedes-Benz C43 AMG, and 2019 Mercedes-Benz C43 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 117, 156, 176, 205, 213, 222, 242, 246, 253, 293 

Shown on model 246 

G12939283Courtesy of MERCEDES-BENZ USA
  Notes on safety-relevant components   AH00.00-Z-0019-01A
REMOVING Remove     
1 Remove covers (2).    
2 Press together clips (3) and remove grab handle (1).    
3 Release and disconnect electrical connector of rear illumination at rear grab handle (1). Model 156
with code 413 (Automatic panoramic sliding sunroof)
Model 205, 253, 293
with code 876 (Interior Light package)
Model 213, 222
 
4 Remove clamps (3) from the body.    
INSTALLING Install     
5 Clip clamps (3) and covers (2) into the grab handle (1).    
6 Connect electrical connector of rear illumination at rear grab handle (1). Model 156
with code 413 (Automatic panoramic sliding sunroof)
Model 205, 253, 293
with code 876 (Interior Light package)
Model 213, 222
 
7 Clip grab handle (1) into the roof.    
INSPECT Check     
8 Check grab handle at roof.   AR68.30-P-4330-01NKB