Remove/Install Paneling On B-Pillar - AR68.30-P-4700LW
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205.0/1/2
Model 213
Model 253
Model 293
Shown on model 205.0
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Move front seat toward the front to end position. | ||
| 2 | Unclip rear door sill (4) and unclip front door sill (5). | When removing bottom B-pillar paneling (2). | AR68.30-P-4100LW |
| 3 | Remove trim (6). | Model 205.0/1/2, 213, 253, 293 with code P65 (Seat comfort package) with code U22 (4-way lumbar support) Model 205.0/1/2, 213, 253 with code 555 (AMG Performance seats) with code U22 (4-way lumbar support) |
AR91.10-P-1201LWA |
| Model 205.0/1/2, 253 with code U22 (4-way lumbar support) except code 409 (Left/right front multicontour seat) except code 555 (AMG Performance seats) except code P65 (Seat comfort package) Model 213 with code U22 (4-way lumbar support) except code 432 (Left and right dynamic multicontour seat) except code 555 (AMG Performance seats) except code P65 (Seat comfort package) Model 293 with code U22 (4-way lumbar support) except code 409 (Left/right front multicontour seat) except code P65 (Seat comfort package) |
AR91.10-P-1201LW | ||
| 4 | Remove seat belt end fitting (7). | Model 205.0/1/2, 213, 253, 293 except code 460 (Canada version) except code 494 (US version) | AR91.40-P-1030-02A |
| Model 205.0/2, 213, 253, 293 with code 460 (Canada version) Model 205.0/2, 213, 253, 293 with code 494 (US version) |
AR91.40-P-1030-02LWE | ||
| 5 | Release edge guard (3) in the area of the top B-pillar trim (1) and in the area of the bottom B-pillar trim (2). | ||
| 6 | Unclip top B-pillar trim (1) from the retaining tabs (8), move downward out of the guides (9), and remove from the seat belt. | ||
| 7 | Unclip lower B-pillar trim (2) and remove. | ||
| 8 | Install in the reverse order |